2. General information
Read this document before you install the product.
Installation and operation must comply with local
regulations and accepted codes of good practice.
2.1 Hazard statements
The symbols and hazard statements below may appear in Grundfos
installation and operating instructions, safety instructions and
service instructions.
DANGER
Indicates a hazardous situation which, if not avoided, will
result in death or serious personal injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious personal injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate personal injury.
The hazard statements are structured in the following way:
SIGNAL WORD
Description of the hazard
Consequence of ignoring the warning
•
Action to avoid the hazard.
2.2 Notes
The symbols and notes below may appear in Grundfos installation
and operating instructions, safety instructions and service
instructions.
FM
Observe these instructions for explosion-proof products.
A blue or gray circle with a white graphical symbol
indicates that an action must be taken.
A red or gray circle with a diagonal bar, possibly with a
black graphical symbol, indicates that an action must not
be taken or must be stopped.
If these instructions are not observed, it may result in
malfunction or damage to the equipment.
Tips and advice that make the work easier.
3. Product introduction
3.1 Product description
TM083137
UPSe
UPSe is a high-efficiency circulator fitted with an electronically
commutated motor. It has been designed for circulating liquids in
heating systems and offers the highest energy savings on the
market.
The pump features a wide range of controls, featuring constant-
pressure, proportional-pressure and constant-speed curve, each
with three settings, making it suitable for almost any heating
application. With the use of the Grundfos GO replacement
compatibility check, it is easier than ever to make your selection.
The new toolless, removeable power connector results in fast and
easy installation. Fewer callbacks can be expected due to its robust
startup, self-venting ability and dry-running protection. Fault finding
is also fast and easy by using error codes on the pump user
interface.
A terminal box with conduit connections is provided for power
connection.
3.2 Intended use
The pump is designed for circulating liquids in heating and air
conditioning systems.
5
English (US)
