20
ENGLISH
OPERATION _______________________________
8
When there is insufficient water left in the
water tank
C
the steam generation stops
and the water filling indicator
O
lights up,
followed by an audible beep. The control
indicator in the selected steam button goes
off. Place the iron on the surface of the
storage base and refill the water tank (see
section
Filling of the water tank
).
9
After ironing, place the iron on the surface
of the storage base.
10
Press and hold down the on/off switch of
the steam ironing station for a few seconds
to switch the steam ironing station off. Set
the temperature control dial to
MIN
and
disconnect the plug from the power.
11
Let the appliance cool down in a location
that is safely out of reach of children.
Caution
Never touch the hot soleplate with bare
hands.
Danger of Burns!
Notes
If the steam function has not been used
for some time the water condensed in the
steam hose transforms into water. When
restarting the steam ironing station again, it
could cause spluttering of the unit and water
droplets at the soleplate. In order to avoid
these droplets falling onto your garments we
recommend to use an old clean cloth in the
beginning. Press the steam jet button until the
droplets disappear and normal steam will be
produced.
If dirt particles escape from the soleplate,
clean the steam ironing station according
to the instructions in section
Cleaning and
Care
.
The steam ironing station will automatically
switch off if no button or any other control
element has been activated for a period of
10 Minutes.
Vertical steam ironing
Note
Vertical steam ironing can be applied to
hanging curtains or clothes (suits, jackets
and coats).
Caution
Never direct the steam at people or pets.
1
The steam ironing station has three steam
settings: low, mid and high. Please refer to
section
Steam ironing
.
2
When the control indicator in the selected
steam button remains lit, it indicates that
the appliance is ready for steam ironing.
3
Hold the iron in vertical position at the
garments or curtains and press the steam
jet button
H
. Continue to move the iron
when ironing.
