ENGLISH
34
usBoperAtion
---------------------------------------------------------------------------------------------------------------
Connectingexternal
datamedia
Before connecting the data medium, switch the
television to standby using »
8
«. Connect the
device and then switch the television on again.
Before removing the external data medium,
the television set must be switched to standby,
so that no data loss occurs.
notes:
7
The »
usB
« socket of the television set
supplies a maximum power of 500 mA in
accordance with USB specifications. Exter-
nal hard disks which require more power
may therefore only be connected to the
»
usBhDD
« of the television set.
7
If you use a network cable for external
hard disks which are connected to the
»
usB hDD
« socket on the television, this
network cable must also be disconnected
from the power supply when the television
is switched off.
7
External data media may not be disconnect-
ed from the television set while files on the
data medium are being accessed.
7
A bi-directional data transfer as defined for
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
7
USB transfer is not in itself an operating
mode. It is only an additional function.
1
Connect the »
usBhDD
« socket of the tel-
evision and the corresponding socket on
the data device (external hard drive, digital
camera, card reader or MP3 player) using a
USB cable;
or
Insert the USB plug of the USB memory stick
into the »
usB
« socket of the television set.
2
Confirm the display »
« with »
«
(green).
– The file browser appears.
