57
ENGLISH
CoNvENIENCEFuNCtIoNS
------------------------------------------------------------------------
Settingthedateandtime
Automaticsetting
Your television set detects the difference in time to
Greenwich Mean Time (GMT) automatically, as
long as the channel selected transmits a time signal.
1
Select the line »Date & Time« with »
v
« or
»
Λ
« and press »
oK
« to confirm.
2
Select the line »Auto« with »
v
« or »
Λ
« and
press »
oK
« to confirm.
– Date and Time will be updated automatically;
or
3
Select the input box with »
v
« or »
Λ
«, enter
the data for Date and Time with »
1...0
«
and press »
oK
« to confirm.
manualsetting
You can also set the difference in time manually
– for example, when the correct time is not de-
tected automatically or does not correspond to
local time for other reasons
1
Select the line »Time Adjustment« with »
v
«,
then select the option »Manual« with »
<
«
or »
>
«.
– The lines »Time Zone« and »Daylight Sav-
ing« are active.
2
Select the line »Time Zone« with »
v
« and
press »
oK
« to confirm.
– The »Select Time Zone« menu appears.
3
Select the appropriate time zone with »
<
«,
»
>
«, »
v
« or »
Λ
« and press »
oK
« to con-
firm.
4
Select the line »Daylight Saving« with »
v
«
and use »
<
« or »
>
« to set the option »Auto«,
»Off« or »On«.
5
Press »
mENu
« to finish the setting.
Note:
7
If the option »Auto« is selected in the line
»Time Adjustment«, the television set auto-
matically adapts the time to the time signal
from the respective broadcaster. However,
different channels may also use time bases
which are different to those of your country;
e.g. foreign broadcasters. In these cases,
reminders and planned recordings may be
annulled due to the time difference.
timersettings
Enteringtheswitch-offtime
(sleeptimer)
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1
Select the line »Sleep Timer« with »
v
« or
»
Λ
«.
2
Enter the switch-off time with »
<
« or »
>
«.
Note:
7
To switch off the function, use »
<
« or »
>
« to
set the switch-off time to »Off«.
3
Press »
mENu
« to end the set-up.
Switch-ontimer
In the »Auto On« menu you can enter a switch-on
time for the television. After the preset time has
elapsed, the television switches on from standby
– at the preselected volume and the preselected
television channel.
1
Select the line »Auto On« with »
v
« or »
Λ
«
and press »
oK
« to confirm.
2
Select the line »Mode« with »
v
« or »
Λ
« and
use »
<
« or »
>
« to select when the television
should switch on.
3
Select the line »Input Source« with »
v
« or »
Λ
«
and use »
<
« or »
>
« to select the input source.
4
Select the line »Service Type« with »
v
« or »
Λ
«
and use »
<
« or »
>
« to select the preferred op-
tion (ATV, DTV, Radio or DATA).
5
Select the line »Channel« with »
v
« or »
Λ
«
and use »
<
« or »
>
« to select the preferred
channel.
Note:
7
The line »Channel« is only active when the in-
put signal currently in use has been set. If no
entry has been made, then the first channel of
the selected input source will be used.
