95
ENGLISH
SETTINGFURTHERCHANNELS
-----------------------------------------------------
Creatingalistoffavourites-analog
channels
You can select your favourite channels and save
them in up to four lists (FAV1 to FAV4).
1
In the »Channel Editor« menu, select the
channel(s) you want to add in the favor-
ites list with »
V
«, »
Λ
«, »
<
« or »
>
«, and
highlight the television channel by pressing
»
OK
«.
–Channel is marked with »
✔
«.
2
Activade the »Tools« menu with »
« (yel-
low).
3
Select the line »Add To Fav.« with »
V
« or
»
Λ
« and press »
OK
« to confirm.
–»Add to Fav.« menu is displayed.
4
Select the favorite list you want to add the
selected channels with »
V
« or »
Λ
« and
store with »
OK
«.
– The channels are marked in the Channel
Editor with »
❶
«, »
❷
«, »
❸
« or »
❹
«.
– You can add the same channel in more
than one favourites list.
– Each favourite list can contain maximum
255 channels.
Notes:
7
You can delete channels from the favou-
rites list. Press »
« (yellow), select the
favorites list the channel is in with »
V
« or
»
Λ
« and press »
OK
« to confirm. Select the
channel(s) you want to delete with »
V
«,
»
Λ
«, »
<
« or »
>
«, and highlight the channel
by pressing »
OK
«.
Press »
« (yellow) and select the line
»Remove from Fav.« with »
V
« or »
Λ
« and
confirm with »
OK
«. The channel you have
selected is now deleted from the favorites
list.
7
When a channel stored in the favourite
channel list is deleted channel order in the
favourite list is updated.
5
Press »
EXIT
« to close the menu.
Displayingsignalinformation
(only for digital television channels)
1
Open the menu with »
MENU
«.
2
Select menu item »Settings« with »
V
«, »
Λ
«,
»
<
« or »
>
« and press »
OK
« to confirm.
3
Select the menu item »Source« with »
>
« or
»
<
« and press »
V
« to confirm.
– »Source« menu is active.
4
Select the line »Advanced« with »
V
« or
»
Λ
« and press »
OK
« to confirm.
5
Select the line »Signal Information« with
»
V
« or »
Λ
« and press »
OK
« to confirm.
– »Signal Information« menu is displayed.
Notes:
7
Signal information changes depending on
the current source.
7
Signal information is shown at the top of the
menu. The more »Frequency« and »Signal
Strength« bar stretches to the right, the more
signal you have.
7
The signal level not only depends on your
receiver system, but also on the channel
which is currently active. Remember this
when aligning your antenna using the
signal level display.
6
Press »
EXIT
« to close the menu.
