ENGLISH
14
settinGs
-----------------------------------------------------------------------------------------------------------------------------------------
initialset-upandtuning
televisionchannels
The television set is equipped with automatic
channel search, which searches for satellite
channels (DVB-S/S2), terrestrial channels (DVB-
T), cable channels (DVB-C) and analogue chan-
nels.
You start the search and the television channels
will be stored into the different Program Tables.
Following, you can sort the channels in the Pro-
gram Tables.
thevarioussettings
Depending on the type of antenna connected,
you can decide which channels you would like
the television to search for.
7
DvB-s/s2
– Tunes digital television channels
from the satellite, from page 15.
You have two options for this search:
–
the basic installation which presets a stand-
ard selection, e.g. the satellite Astra 19.2°
East; you need only start the search;
–
the professional installation, which allows
you to make all required settings and set pa-
rameters for your receiver system.
7
DvB-t
– Tunes digital terrestrial television
channels, on page 17.
7
DvB-C
– Tunes digital television channels
from the cable provider, on page 17.
7
Tunes analogue television channels, in the
chapter “Special functions”, starting on
page 54.
7
Further settings for digital television chan-
nels after the initial set-up can also be found
in the chapter “Special Settings”, starting on
page 48.
note:
7
Make the language and country selection for
all types, then continue reading the respective
chapter.
selectinglanguage,countryand
operatingmode
1
Switch on the television set from standby with
»
8
«, »
1…0
« or »
p+
« or »
p-
«.
–
During initial set-up, the »Installation Guide«
will be displayed.
help:
7
If this menu is not displayed, restore the
television set to its default settings (see
page 39).
2
Select the menu language with »
<
«, »
>
«,
»
v
« or »
Λ
« and press »
oK
« to confirm.
3
Select the mode with »
<
« or »
>
« and press
»
oK
« to confirm.
– The settings used in »Home Mode« help to
save energy.
–
Alternatively, the menu item »Shop Mode«
can be selected which the retailer can use
for demonstrating the device functions.
note:
7
End the »Shop Mode« by restoring the televi-
sion set to its default settings (see page 39).
4
Select the country in which the television set
is operated with »
<
«, »
>
«, »
v
« or »
Λ
« and
press »
oK
« to confirm.
– The »Source Setup« menu appears with the
»Connection Type« line marked.
note:
7
You can find a description of how to tune
the television channel of your choice – de-
pending on the antenna connected – in the
following chapters.
