ENGLISH
21
Selecting the tuner input source
1
Press »
SOURCE
« to select TUNER as the input source.
– The most recently selected channel is activated (Last Station
Memory).
– Display: e.g. »
FM 2 100.60
« or »
ENERGY
«.
Selecting a preset
1
Select the frequency band (FM1, FM2 or AM) with »
BAND
«.
2
Select the preset with »
1 ... 8
«.
– Display: for example, »
FM2 P7
« with the frequency or the
station name.
Stereo/mono reception
If the hi-fi system is set to FM stereo reception, the red LED
»
Z
STEREO
« lights up. If the signal from the FM stereo channel is
weak, you can improve the sound quality by switching to mono
reception.
1
Press »
JOG
« to open the jog menu.
– Display: »
ADJUST BASS
«.
2
Select the »
ADJUST
« setting by pressing »
JOG
« as many times
as necessary.
3
Make the »
MONO
« setting using »
+
–
« on the remote control
or »
–
z
+
« on the hi-fi system.
– The red »
Z
MONO
« LED lights up.
RDS information
RDS (Radio Data System) is an information system which is trans-
mitted additionally by most FM stations.
When the hi-fi system receives an RDS station, the station name
appears in the display, for example »
FANTASY
«.
Note:
It may take some time before all the RDS information is avail-
able.
Searching for RDS stations
1
To search for an RDS station, press »
8
« or »
9
« as often as
necessary.
– If the reception is strong enough, the station name appears
after a short time.
TUNER MODE
_______________________________________
FM1 P2
ENERGY
14:32
FM2 P7
VILRADIO 19:48
ADJUST BASS
+3
ADJUST
MONO
FM2 P8
FANTASY
20:59
