30
Your hi-fi system has two timer modes:
– The switch-on timer, which switches the hi-fi system on at the set
time and wakes you with an alarm or music.
– The sleep timer, which switches the hi-fi system off at a preset time.
Switch-on timer
Setting the switch-on timer
The time must be set on the hi-fi system.
1
Hold down »
e
1
« or »
e
2
« until »
Alarm 1 Adjustment
«
or »
Alarm 2 Adjustment
« appears in the display.
2
To set the alarm time, briefly press »
Ȅ
+
« or »
Ȅ
–
« on the
hi-fi system as often as necessary.
– The time moves forwards or backwards in one minute steps
or
press and hold down »
Ȅ
+
« or »
Ȅ
–
« on the hi-fi system.
– The time moves forwards or backwards at rapid run-through.
3
Press »
BAND
« (for radio stations) to select the input source
(radio station, CD or USB/CARD) or »
SOURCE
« (for CD and
USB).
Notes:
When selecting CD, make sure a CD is inserted. When
selecting USB, make sure a memory card is inserted or an MP3
player is connected.
If you select tuner, press the number buttons »
1 ... 8
« to select
the preset.
AUX input source is not available for the alarm mode.
4
Adjust the initial volume using »
+
–
« on the remote control
or »
–
z
+
« on the hi-fi system.
5
To end the settings, briefly press »
e
1
« or »
e
2
«.
Note:
You can select music or signal tone when you have activated the
alarm.
TIMER MODE
________________________________________
Alarm 1
Adjustment
Alarm 1 Time
05:35
Alarm1 Source
CD
Alarm1 Volume
20
