42
INFORMATION
_____________________________________________________________
Cleaning the CD unit
If the device is unable to scan CDs perfectly, use a standard commercially available cleaning CD to
clean the laser optics. Other cleaning methods may damage the laser optics.
To clean CDs use a lint-free cloth and wipe them in a straight line from the centre of the disc out-
wards. Do not use cleaning fluid for vinyl records or other solvents or scouring agents.
Cleaning the tape drive
To guarantee good recording and playback quality, the parts shown (1, 2, 3) should be cleaned
after every 50 hours of use, or once a month.
Open the tape compartment and moisten a cotton swab with alcohol or a special head-cleaning
fluid. Start playback and clean the rubber idler (3). Switch to pause playback and clean the capstan
(2) and the magnetic heads (1). To clean the magnetic heads (1), you can also play a cleaning tape.
Technical data
1
2
1
3
This device is noise-suppressed accor-
ding to the applicable EC directives.
This product fulfils the European directi-
ves 89/336/EEC, 73/23/EEC and
93/68/EEC.
This device conforms to the safety regu-
lation DIN EN 60065 (VDE 0860) and
therefore the international safety regula-
tion IEC 60065.
Amplifier unit
Output
:
Sine wave power 2 x 12 W
Music power 2 x 20 W
Input sensitivity/
impedance
500 mV/22 k
Ω
Receiver unit
Reception range
FM 87.5 ...108.0 MHz
MW 522 ... 1620 kHz
CD unit
Frequency response
20 Hz ... 20 kHz
Noise-voltage
ratio:
(wtd.) > 90 dB
Cassette unit
Sound recording medium
Compact tape according to DIN 45516
(IECI)
Frequency range
40 Hz ... 14.0 kHz
Track position
International quarter-track
Noise-voltage ratio
(wtd.)
≥
55 dB
Tape speed fluctuation
(WRMS)
0,15 %
System
Power supply:
Operating voltage 230 V~
Mains frequency 50/60 Hz
Max. power consumption 75 W
Power consumption in stand-by < 2 W
Dimensions and weight
Device dimensions
W x H x L 170 x 245 x 230 mm
Device weight 3.9 kg
Loudspeaker dimensions
W x H x L 130 x 240 x 160 mm
Weight per speaker 1.3 kg
