background image

71

ENGLISH

OPERATING PRINCIPLES OF THE CIRCUIT COMPONENTS

 

IC100 Current-limited power dis-

tribution switch 

(IC-SMD XC8107AC-

10MR-GW)

IC100, is the DC-DC converter through which 

MAIN3V3 is obtained from STBC3V3. Output 

of this IC is active when TV is in stand-by. 
When IC output is faulty, chassis does not carry 

out any operations. Led is not lit. No log is re-

ceived.

IC105 DC-DC converter 

(IC-SMD 

XC8107AC10MR-GW)

IC105, is the DC-DC converter through which 

12V_PANEL is obtained from VCC.  It helps 

keep the output stable for 12 V Panel based on 

the changing values of VCC.

IC1000 LED Backlight Driver inte-

grated circuit  

(IC-SMD AP3064FNTR-

G1 )

IC1000 integrated circuit is on the chassis on 

24" LUNA and 32" cabins. There is no separate 

LED Driver board. It is supplied through direct 

PSU supply.

 

IC201 System reset integrated circuit 

(IC-SMD 

APX812-29UG-7)

With IC201 integrated circuit, System-RST signal 

is sent to the main integrated circuit and the 

system is reset when STBC3V3 voltage drops 

below 2.93 V.
 

Summary of Contents for COREMAX M1 PROJECT GM



































































































Reviews: