Care and Maintenance
The cabinet should only be cleaned with a soft
cloth which picks up dust. Polishing or clea-
ning agents may damage the surface.
Parts contacting the tape should be checked
from time to time for contamination by tape
abrasion,
see illustration at the end of this booklet.
If cleaning should be necessary, use a cotton
wrapround soaked in cleaning benzine.
Never use a metallic or other hard object!
– Remove the steno-cassette from the cassette
compartment.
– Switch the unit on:
ļ
- record
Ł
start.
Warning signal sounds as no steno-cassette
is in the cassette compartment!
– Press one of the two bolts A in direction of
the cassette compartment.
– Clean the tape-contacting parts:
Rubber pinch roller B, capstan C, sound
head D, and erase head E.
In the event of malfunctions, contact your
specialised dealer.
Repair note on mains/charging units of the
678* series:
Only original spare parts can be used. The
mains lead must only be replaced by a specia-
list!
Subject to technical alterations and
alterations in styling. E. and O.E.
GB
ķ
7
