background image

13

Connecting a 2nd TV and optional 2nd handset

If you wish you can connect a second TV to the Receiver/Player. This allows the
second TV to view either the DVD picture or the Digital TV signal from a different
room. If you purchase the optional 

External Infrared Receiver Kit

you can

also control the Receiver/Player from the second room.

1

Press »      «, select »

SETUP

« menu and press »

OK

«.

2

Select »

RF Modulator Setup

« and press »

OK

«.

3

Now choose if you wish the RF outputs enabled using »

#

«/»

$

« to select

»

ON

« (picture available on 2nd TV) or »

OFF

« (picture on 2nd TV switched

OFF)

4

Now choose if you wish to enable the 

External IR

for control from a 2nd

room. Use »

#

«/»

$

« to select »

ON

« or »

OFF

«.

5

You can adjust the channel of the 

RF modulator 

to avoid any interference

from other TV channels. Choose a channel between 21 and 69 using
»

#

«/»

$

«.

6

Choose the output standard for the RF modulator. Use »

#

«/»

$

« to choose

between »

PAL-I

« for the UK or »

PAL-G

« for the rest of Europe.

7

To  aid RF tuning, the Receiver/Player has a built in »

Test Pattern

«. Use

»

#

«/»

$

« to turn it »

ON

« or »

OFF

«. The test card is two vertical white bars

on a black background.

PIN number

You can choose a PIN (Personal Identification Number) for use with parental
controls. The receiver was originally programmed with 1234. It is recommended
that you change this for your own number.

1

Press »      «, select »

SETUP

« menu and press »

OK

«.

2

Select »

PARENTAL CONTROL

« and press »

OK

«.

3

Now enter the current PIN ****. (1234 if this is your first change).

4

Select »

CHANGE PIN

« and press »

OK

«.

5

Use »

0..9

« to enter a new PIN.

6

Use »

0..9

« to confirm new PIN. When confirmed, this number is now stored.

KEEP THIS NUMBER SAFE!

7

To exit menu press »

«.

ADVANCED SET-UP

TV MODE

Summary of Contents for DUO GRP6000

















































Reviews: