Connecting the television and VCR …
… using aerial (RF) cables
1
Connect the cable of your TV aerial to the »
Aerial In
« socket on the Receiver/Player.
2
Connect the short aerial from the »
Loop Through
« socket to the »
RF IN
« socket, both
on the Receiver/Player.
3
Connect the long aerial lead from the »
RF Out 1
« socket to your TV or VCR »
Aerial
IN
«
… using SCART cables
1
Plug the standard SCART cable (supplied) into the »
TV
« scart socket on the
Receiver/Player and the appropriate socket for RGB reproduction on the TV set. See TV
user guide for details on this.
2
Plug a standard SCART cable (not supplied) into the »
VCR
« scart socket on the
Receiver/Player and the TV socket on the VCR.
3
If required connect the other devices as shown in the diagram above.
4
If you wish to connect the Receiver/Player to your HiFi system for improved sound, plug
standard phono cables into the »
AUDIO OUT L R
« sockets and into the appropriate
sockets on your HiFi system.
… using a Y/C cable (S-Video) and phono cables
1
Plug a standard Y/C cable into the »
S-VIDEO
« socket on the Receiver/Player and into
the appropriate socket (S-VIDEO IN) on the television.
2
Plug standard phono AV cables into the »
AUDIO OUT L R
« sockets on the
Receiver/Player and the appropriate sockets (AUDIO IN) on the television.
Note:
As this product is a combination product, this manual will deal with the two halves of the
product separately. To switch between the two modes (
TV mode
and
Disc mode
) press
the »
« key.
If the Receiver/Player is connected via the »
S-VIDEO
« socket, before you can use
Disc
mode
, you must carry out the setting described in “Selecting the video output socket” in the
Disc
section of this book.
9
CONNECTION AND PREPARATION
TV
Aerial
Summary of Contents for DUO GRP6000
