Foot care attachments
The foot care attachments can be used as follows:
– Brush attachment
stimulates the reflex zones
on the soles of your feet.
– Massage attachment
gives you a soothing
direct massage.
– The
attachment removes and loosens hard
skin.
4
3
2
Operation
Your massage foot bath is good for your health
as well as good for cleaning your feet. Wash
your feet before use only using clean water.
Make sure your feet are always in a sitting posi-
tion in the appliance. Never stand upright.
Make sure the appliance is switched off before
you fill it with water. Only place your feet in the
appliance once the power cord is plugged in and
the appliance is switched on.
1
Fill up the foot bath with warm water at approx.
22 °C room temperature. Pay attention to the
marking for the
maximum depth in the
base of the appliance.
2
Plug the power cord
into the wall socket.
3
Press the
button to switch on the appliance.
– Operation display
lights up.
4
Immerse your feet in the water in a sitting
position.
Temperature setting
1
Set the water temperature in five levels (35 °C,
38 °C, 42 °C, 45 °C and 48 °C) by pressing
the button
repeatedly.
– The set temperature appears in the
display.
Note
7
For most people, the most comfortable temper-
ature is between 36 °C and 42 °C.
G
C
H
B
R
K
M
OPERATION
__________________________________________________________
14
ENGLISH
Caution
7
The FM 8720 is a product for your well-being.
It is not a medical product. No medical recom-
mendations can be made on the basis of its
use or of the results displayed.
