Grundig GCA-B0322V, Owner'S Manual

DAY & NIGHT  [DAY, NIGHT, AUTO, EXT] :
-  DAY: If set to DAY, it will be fixed to 
colour mode regardless of the ambient 
conditions.
-  NIGHT: If set to NIGHT, it will be fixed to 
Black-and-White mode regardless of the 
ambient conditions. If you press the SETUP 
key, the NIGHT submenu is selected.

-  AUTO: The camera will automatical 
switch between DAY and NIGHT mode, 
according to the lighting condition. If you 
press the SETUP key, the AUTO sub-menu 
is selected.

-  EXT: This enables an auto switch between DAY and NIGHT mode using the 
brightness level detected by the photocell.
Attention:
The camera models GCA-B0323V and GCA-B0326V have an integrated IR illuminator 
with photocell. Therefore we recommend the DAY/NIGHT menu setting EXT to get the 
best results.

WHITE BAL : 
If you want to adjust the colour scheme, use the WHITE BALANCE function.

DIGITAL ZOOM   [ON, OFF] : 
You can set the digital zoom factor and position. When the zoom factor and position are 
defined, the digital zoom function will operate.

DETAIL   [0~3] :
Controls the horizontal or vertical distinction.

V-SYNC   [INT] : 
This camera model is set to fixed INT (Internal Syncronisation).

AGC COLOR SUP   [LOW, MID, HIGH] : 
Adjust the color scheme according to the AGC value.

REVERSE   [OFF, H/V, H/V] : 
Mirrors video signals horizontally, vertically, or both.

POSI/NEGA   [+, -] : 
Output as it is or mirroring the video brightness signal.

PIP   [OFF, ON] : 
Displays a sub image together with the main image on the same screen using the 
Picture In Picture Function.
Note :
- If more than one privacy zone is set and the PRIVACY SET is set to ON, the PIP 
function will be deactivated.

11

English