GCR001IP
12
Using Earphones or Headphones
To listen to the radio privately, connect an earphone or headphone (not
included)
with a 3.5mm plug to the jack on the back of the radio. Plugging in an
earphone or headphone disconnects the internal speaker.
Remarks
:
In case of malfunction due to electrostatic discharge and/or electrical
fast transient (Burst), just reset the product (reconnecting of the power
source may be required) to resume normal operation.
Specification
External supply:
10V DC plug-in mains unit
Back
up
battery:
3V
DC
2xAA
DC Voltage Socket:
5.5mm diameter (inner pin
positive, outer negative)
Receiver Bands:
FM 87.5-108 MHz
AM 522-1629 kHz
Aerials:
In
built
T
aerial
Power Output (at 10% THD): 2 x 3W
Headphones Socket:
3.5mm Speaker
Diameter:
2 x 57mm
In the course of product improvement, we reserve the right to make
technical and design modifications at any time.