9
1)
Hook the two ends of the safety rope to the speed dome back box and the
bracket respectively as shown in Figure 2-5.
Safety Rope
Figure 2-5
Safety Rope
2)
Route the cables through the bracket and connect the corresponding cables.
3)
Loosen the lock screws on the bracket.
4)
Align the speed dome with bracket and rotate it to the bracket counterclockwise
or clockwise tightly as shown in Figure 2-6.
Push
Rotate
Lock Screw
Figure 2-6
Align to the Bracket
5)
Tighten the two lock screws with the wrench to secure the speed dome and the
bracket.
4.
Remove the protective film on the bubble after the installation is finished.
