12
Get the Grundig IP-Finder tool from the supplied disk or the official website and install
the software according to the prompts. Follow the steps to activate the camera, please
refer to the User manual for other activation methods.
Steps:
1.
Run the Finder software to search the online devices.
2.
Check the device status from the device list and select the inactive device.
Figure 3-4 Grundig IP-Finder Interface
Note:
The software supports activating the camera in batch. Refer to the user manual of
Grundig IP-Finder tool for details.
3.
Create and input the new password in the password field and confirm the
password.
STRONG PASSWORD RECOMMENDED
–
We highly recommend you create a
strong password of your own choosing (Using a minimum of 8 characters,
including at least three of the following categories: upper case letters, lower
case letters, numbers, and special characters.) in order to increase the security
of your product. And we recommend you reset your password regularly,
especially in the high security system, resetting the password monthly or
weekly can better protect your product.
4.
Click
Activate
to save the password.
You can check whether the activation is completed on the popup window. If
activation failed, make sure that the password meets the requirement and try again.
