EN / 35
• Drying
This function allows the laundry to dry after
washing. Check in the programme table
with which programmes this auxiliary func-
tion can be selected.
6.11.2 Functions/Programmes
Selected by Pressing the
Function Keys for 3 Seconds
• Machine Care
Press and hold the related auxiliary func-
tion button for 3 seconds to select the pro-
gramme. Regularly clean (once every 1 to
2 months) the drum for ensuring the re-
quired hygiene. Steam is applied before the
programme to soften the residues in the
drum. Turn on the programme when the
machine is completely empty. For more ef-
fective results, place powder anti-limescale
(drum cleaning materials) suitable for
washing machines inside the detergent
compartment “2”. There is a drying step
after drum cleaning in this programme for
the inside of the drum to dry.
This is not a washing programme.
This is a maintenance programme.
Do not turn this programme on
when there is something inside the
machine. When you attempt to op-
erate, the machine automatically
senses that there is load inside,
and may quit or resume the pro-
gramme as per the model of your
machine. An effective cleaning is
not achieved if the programme is
resumed.
• Anti
This function is selected when the spin se-
lection button is pressed and held for 3
seconds and the programme follow-up light
for the relevant step turns on. When selec-
ted, it aerates the laundry for up to 8 hours
at the end of the programme to prevent
creasing. You can cancel the programme
and take your laundry out at any time dur-
ing the 8-hour duration. Press the function
selection key or the machine on/off key to
cancel the function. The programme follow-
up light will remain on until the function is
cancelled or the step is complete. If the
function is not cancelled, it will be active in
the subsequent washing cycles as well.
• Steam
This function can be selected by pressing
and holding the related auxiliary function
button for 3 seconds.
This function helps to reduce the creases of
your cotton, synthetic and mixed clothes,
shorten the ironing time and remove the dirt
by softening.
*Your laundry may be hotter at the end of
the washing cycle when the steam function
is applied at the end of the programme.
This is an expected condition within the op-
erating conditions of the programme.
• Child Lock
Use Child Lock function to prevent children
from tampering with the machine. Thus you
can avoid any changes in a running pro-
gramme.
You can switch on and off the ma-
chine with On / Off button when the
Child Lock is active. When you
switch on the machine again, pro-
gramme will resume from where it
has stopped.
When the Child Lock is enabled, an
audio warning will be given if the
buttons are pressed. Audio warning
will be cancelled if the buttons are
pressed five times consecutively.
To activate the child lock:
Press and hold Drying Level Adjustment
button for 3 seconds. After the countdown
as “CL 3-2-1” on the display is over, “CL
On” (Child Lock On) symbol appears on the
display. You may release the Drying Level
Adjustment button when this symbol is dis-
played.
To deactivate the child lock:
Press and hold Drying Level Adjustment
button for 3 seconds. After the countdown
“CL 3-2-1” on the display is over, “CL
Off” (Child Lock Off) symbol appears on the
display.
