EN / 42
WARNING
If the Bluetooth connection is
turned on in your product, then the
Remote Control function can be se-
lected.
If the Remote Control function can-
not be selected, check the connec-
tion status. If the connection cannot
be established, repeat the initial
setup steps over the product.
For safety reasons, the product
door will be locked and remain
locked regardless of the operating
mode of the product when the Re-
mote Control function is activated.
If you want to open the door of the
product, you will need to turn the
programme selection knob or press
the remote control key to deactivate
the remote control function.
When you want to control your washing
machine remotely, after the front lid is
closed, you need to activate the Remote
Control function by pressing the Remote
Control button while the programme knob is
in the Download Programme/Remote Con-
trol position button on the control panel of
your washing machine. Once access is es-
tablished to the product, you will see a
screen similar to the one below.
When the Remote Control is enabled, you
can only manage the machine, turn it off
and follow the status through your washing
machine. And all functions except child lock
can be managed through the application.
You can follow whether the Remote Control
function is On or Off through the function
indicator on the button.
If the Remote Control function is Off, all the
operations are handled on the washing ma-
chine and only status follow-up is allowed
on the application.
In the event that Remote Start function can-
not be turned on, appliance will make a
warning sound when you press the button.
This might happen in cases such as when
the appliance is turned on and there is no
paired smart device via bluetooth.
Bluetooth settings being Off or the washing
machine's door being open are examples
for such cases.
Once you activate this function on the
washing machine, it will remain enabled
apart from certain conditions and allow you
to control your washing machine remotely
via bluetooth.
In certain cases, it deactivates itself for
safety reasons:
• When your washing machine undergoes
a power interruption.
• When programme knob is turned and a
different programme selected or appli-
ance is turned off.
6.20.4 Troubleshooting
Do the following if you have a problem with
controlling or connection. Observe whether
the problem persists or not after the action
you have performed.
a. Check whether your smart device is
connected to the relevant home net-
work.
b. Restart the product application.
c. Turn bluetooth off and then on via user
control panel.
d. If the connection cannot be established
with the above processes, repeat the
initial set-up settings on the washing
machine.
If the problem persists, consult an Author-
ised Service Agent.
