23
EN
GLISH
SYSTEM SETUP
Note:
The DVD player simultaneously outputs a Dolby Digital signal and an
analog signal, but you have to select the Analog output if you want
to take advantage of the Karaoke effects.
HDCD Setup Page
FILTER:
Set the ratio of filter
Please choose the sampling frequencies of digital filter, the higher the
sampling frequencies are, the clearer the audio quality is. When de-
fault setting is off, it will display “CD” by reading HDCD, for HDCD
playback, please choose 1X or 2X(44.1K or 88.2K).
Video Setup Page
Video Output
Set the video output.
CVBS: Set to CVBS Output
YUV: Set to Y. U. V. Output
RGB:Set to RGB Output
TV Mode Setup Page
TV MODE: Set the scan mode to same of your TV. If there are picture
interferences or no picture, please press
»
V.MODE
«
to correct it. (The
component option must select YUV , the TV MODE option is valid.)
Video Quality Setup Page
Sharpness
Set the sharpness level of video output.
Brightness:
Set the brightness level of video output.
Press right button the TV will display a value. Press
»
LEFT/RIGHT
«
but-
ton to adjust, then press
»
ENTER/PLAY
«
button to confirm and return
upon menu.
Contrast:
Set the contrast level of Video output. Press right button the
TV will display a value. Press
»
LEFT/RIGHT
«
button to adjust, then
press
»
ENTER/PLAY
«
button to confirm and return upon menu.
Gamma:
Set the gamma value of the Video.
Hue:
Set the hue value of the Video. Press right button the TV will
display a value. Press
»
LEFT/RIGHT
«
button to adjust, then press
»
ENTER/PLAY
«
button to confirm and return upon menu.
HDCD Setup Off Page
Filter
Off
1x
2x
Filter
Video Setup Page
Video Output
TV Mode
Quality
RGB(CVBS)
CVBS
YUV(CVBS)
Video Output
Video Quality Setup
Sharpness
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
MID
00
00
None
00
00
1T
High
Medium
Low
Sharpness
