24
SYSTEM SETUP
Saturation:
set the saturation of the video. Press right button the TV will
display a value. Press
»
LEFT/RIGHT
«
button to adjust, then press
»
ENTER/PLAY
«
button to confirm and return upon menu.
Luma ( Luminance ) Delay:
Set the luminance delay of video output
depend on the TV’s brightness, color. It sets 1T commonly for DVD.
Preference Setup Page
The preference setting is active only when no disc, and the setting is
effective on each time power on till exchanging the saved setting.
TV Type
This player supports different TV output, including MULTI(Auto),
NTSC, and PAL systems. lf your TV support only NTSC or PAL and
had you inadvertently selected the wrong TV type, the TV screen will
become flickering and black-and-white. In this case, you should press
the
»
SETUP
«
button to set as following.
Note:
How to Set the TV Type?
You may switch the NTSC/PAL setting of the DVD
player to match the video signal of your TV.
The table below shows what kinds of disc are compatible
with each setting (AUTO, PAL and NTSC)
Disc
Output Format
Type
Format Selected TV System Mode
DVD
NTSC
NTSC PAL
AUTO
PAL
NTSC PAL
NTSC
------
PAL
PAL
PBC
PBC Mode:
Set the PBC (Playback Control) to be on or off.
Audio
Set the preferred audio language as the default when playing DVD.
(IF DVD support these languages)
Subtitle
Set the preferred subtitle language as the default when playing
DVD.(if DVD support these languages)
Disc Menu
Set the preferred menu language as the default when playing DVD.
(if DVD support these languages)
Preference Page
TV Type
PBC
Audio
Subtitle
Disc Menu
Password
Default
PAL
On
ENG
ENG
ENG
PAL
Auto
NTSC
Set TV Standard
Parental
