ENGLISH
23
INITIAL SETUP
______________________________________
Setting the TV system (video output format)
The colour norm of the DVD recorder’s screen menus has to be
adapted to the format of your television or flat screen.
Select »NTSC« for televisions with the NTSC standard, or »PAL« for
those with the PAL standard.
1
Open the setup menu by pressing »
SETUP
«.
2
Select »
« with »
S
« or »
A
« and press »
OK
« to
confirm.
3
Select »Video output format« using »
S
« or »
A
« and press
»
OK
« to activate it.
4
Select the setting (» NTSC« or » PAL«) with »
S
« or »
A
« and
press »
OK
« top confirm.
5
Press »
SETUP
« to finish the setting.
Selecting the screen format of your television set
This setting depends on your television or flat screen, and on the
information on the DVD.
If you have a 4:3 format television or flat screen, the following set-
tings are available:
»4:3 P&S« for wide-screen playback, with the left and right edges
of the picture cropped (depending on the DVD used)
or »4:3 LB« for wide-screen playback with black bars on the top
and bottom edges of the screen.
If you have a 16:9 format television or flat screen, select the »16:9«
setting.
1
Open the setup menu by pressing »
SETUP
«.
2
Select »
« with »
S
« or »
A
« and press »
OK
« to
confirm.
3
Select »TV aspect ratio« with »
S
« or »
A
« press »
OK
« to
activate it.
4
Select the picture format (»4:3 P&S«, »4:3 LB« or »16:9«) with
»
S
« or »
A
« and press »
OK
« to confirm.
5
Press »
SETUP
« to finish the setting.
Screen saver
Progressive/Interlace
SCART output
Country
Video ourput format
Restore factory settings
SYSTEM SETUP – GENERAL
On
a
S
RGB
S
U. K.
S
PAL
S
OK
Interlace
S
s
TV aspect ratio
Rating level
Digital audio output
Dynamic range compression
SYSTEM SETUP – PLAYBACK
16 : 9
S
RAW
S
OFF
S
OFF
