42
Preparing for recording
1
Switch on the television and select the preset channel for the
DVD recorder.
2
Switch the DVD recorder to stand-by with »
Ǽ
« and switch the
remote control out of stand-by with »
Ǽ
«.
Inserting a disc
1
Press »
ə
« on the DVD recorder or press and hold down »
7
«
on the remote control.
– Display: »
«, the disc tray opens.
2
Insert the disc you want to play in the disc compartment with the
label facing upwards.
3
Press »
ə
« on the DVD recorder or »
8
« on the remote con-
trol.
Manually recording television programmes from
the antenna or the cable feed
1
Press »
SOURCE
« to select the input source (for example, TV).
– Display: for example »Monitor P001 ARD«, the current TV
station is shown.
2
Press »
A
« or »
S
« or use the number buttons »
1…0
« to
select the TV channel.
3
Press »
Q-SET
« until the recording quality you require appears
in the display.
4
Press »
●
« to start recording.
– The amount of recording time available is shown.
Notes:
During the recording, you can press »
●
« to enter the switch-off
time (30 minutes, 60 minutes, 90 minutes, none).
The switch-off time depends on the playing time left on the disc.
The DVD recorder automatically switches off the recording after
this time.
The info line can be hidden by pressing
x
.
5
Press »
!
« to pause recording.
6
Press »
●
« to resume recording.
7
Press »
7
« to end the recording.
– Display: »Post processing. Please wait a moment«.
A warning message pops up. Select »OK« with »
a
« or
»
s
« and press »
OK
« to confirm.
The DVD recorder actualises the index.
ONE TOUCH RECORDING
_________________
