55
Timer Recor
ding
Why This Happened
Why is my preset program not completely
recorded?
Incomplete recording may be resulted from:
• Insuf
fi
cient space
If there is not enough space on the target medium,
your preset program can only be partially recorded
depending on the amount of capacity available.
• Overlapped Timer Program settings
The un
fi
nished recording may occur when time
settings of two Timer Programs overlap. Under
the circumstances, the DVD recorder stops record-
ing the earlier program at the start time of the
later program. (The black bars represent contents
recorded.)
Setting Timer Program
(ShowView
®
Mode)
There are two ways to set up Timer Programs using
the ShowView
®
system. For more information on
how to set up the system, please see
‘Setting the
ShowView
®
System’
.
Path 1:
1.
Press the
ShowView
button to display the
ShowView menu.
Path 2:
1.
Press
TIMER
to display the Timer Record
menu.
2.
Press
ENTER
to start new setting, or press
56
to select a previous setting which you would like
to modify, then press
ENTER
.
3.
Press
5634
to go to the ‘ShowView’ button,
then press
ENTER
to display the ShowView
setup menu.
1
Press
5634
or number buttons (0-9) to
enter the ShowView
®
number, then press
ENTER
.
PDC/VPS
Details of the preset program will be displayed.
2
The ‘Preset Channel’ dialogue box will appear,
if the DVD recorder fails to
fi
nd information of
a corresponding channel. Presss
5634
or
number buttons (0-9) to enter the channel num-
ber shown on your TV, then press
ENTER
.
PDC/VPS
Note
• To make use of the ShowView
®
system for timer
recording, you need to match the GCNs (guide
channel numbers) used by the ShowView
®
system with the channel numbers shown on
your TV, so that the relevant information can be
correctly assigned to the programs you would
like to record.
3
Press
56
to select ‘Repeat’, then press
ENTER
. Press
56
to select a recording
frequency (Once/Daily/Weekly), then press
ENTER
.
4
Press
56
to select ‘HDD/DVD’, then
press
ENTER
. Press
56
to select the target
medium, then press
ENTER
.
5
Press
56
to select a recording mode, then
press
ENTER
.
6
Press
56
to select ‘Sound’, then press
ENTER
. Press
56
to select the TV audio
mode, then press
ENTER
.
7
Press
56
to select ‘PDC’, then press
ENTER
.
Press
56
to switch on or off the PDC func-
tion, then press
ENTER
.
Summary of Contents for GDR 5530 HDD
Page 1: ...DVD RECORDER GDR 5530 HDD ENGLISH...
Page 100: ...97 Quick Reference...