13
TR
5.
Preliminary preparation
5.1.What to do for
energy saving
A
Connecting the product
to electronic energy-saving
systems is harmful, as it
may damage the product.
•
For a freestanding appliance;
‘this refrigerating appliance is
not intended to be used as a
built-in appliance.
•
Do not keep the refrigerator
doors open for long periods.
•
Do not place hot food or
beverages into the refrigerator.
•
Do not overfill the refrigerator;
blocking the internal air flow
will reduce cooling capacity.
•
In order to load the maximum
quantity of food into the
cooler compartment of your
refrigerator, the upper drawers
should be taken out and the food
should be placed onto the wire/
glass shelves. Net volume and
energy consumption information
declared in the energy label of
your refrigerator was tested by
taking out the upper drawers
in the cooler department and
the ice bucket, which is easily
removable by hand.
•
Food packages should not be
in direct contact with the heat
sensor located in the cooler
compartment. The food should
be 10 cm away from the sensor.
In case of contact with the
sensor, energy consumption of
the device may increase.
