26
Temperature in the fridge or freezer is very high.
•
The fridge temperature is adjusted to a very high value. >>> Fridge
compartment temperature setting has an effect on the temperature
of the freezer. Change the temperatures of the fridge or freezer and
wait until the relevant compartments attain a sufficient temperature.
•
Doors are opened frequently or left ajar for a long time. >>> Do not
open the doors frequently.
•
Door is ajar. >>> Close the door completely.
•
The refrigerator is plugged in or loaded with food recently. >>> This
is normal. When the refrigerator is plugged in or loaded with food
recently, it will take longer for it to attain the set temperature.
•
Large amounts of hot food might be put in the refrigerator recently.
>>> Do not put hot food into the refrigerator.
Vibrations or noise.
•
The floor is not level or stable. >>> If the refrigerator rocks when
moved slowly, balance it by adjusting its feet. Also make sure that the
floor is strong enough to carry the refrigerator, and level.
•
The items put onto the refrigerator may cause noise. >>> Remove the
items on top of the refrigerator.
There are noises coming from the refrigerator like liquid flowing,
spraying, etc.
•
Liquid and gas flows occur in accordance with the operating
principles of your refrigerator. >>>It is normal and not a fault.
Whistle comes from the refrigerator.
•
Fans are used in order to cool the refrigerator. It is normal and not a
fault.
Condensation on the inner walls of refrigerator.
•
Hot and humid weather increases icing and condensation. It is
normal and not a fault.
•
Doors are opened frequently or left ajar for a long time. >>> Do not
open the doors frequently. Close them if they are open.
•
Door is ajar. >>> Close the door completely.
Humidity occurs on the outside of the refrigerator or between the
doors.
•
There might be humidity in the air; this is quite normal in humid
weather. >>> When the humidity is less, condensation will disappear.
•
If moisture forms in the area between the two refrigerator doors,
disable the “Energy Saving” mode.
