EN / 6
• The plug shall be easily ac-
cessible. If this is not possible,
a mechanism that meets the
electrical legislation and that
disconnects all terminals from
the mains (fuse, switch, main
switch, etc.) shall be available
on the electrical installation.
• Do not touch the plug with wet
hands.
• When unplugging the appli-
ance, don’t hold the power
cord, but the plug.
• When placing the device,
make sure that the feed cable
is not being pinched or dam-
aged.
• Do not place multi portable
sockets or portable power
supplies behind the device.
1.4
Handling Safety
• This product is heavy, do not
handle it by yourself.
• Do not hold the product from
its door while handling the
product.
• Be careful not to damage the
cooling system and the pipes
while handling the product. Do
not operate the product if the
pipes are damaged, and con-
tact an authorized service.
1.5
Installation Safety
• Contact the Authorized Ser-
vice for the product's installa-
tion. To prepare the product
for use, see the information in
the user manual and make
sure the electric and water util-
ities are as required. If not, call
a qualified electrician and
plumber to arrange the utilities
as necessary. Failure to do so
may result in electric shock,
fire, problems with the
product, or injury.
• Check for any damage on the
product before installing it. Do
not have the product installed
if it is damaged.
• Place the product on a clean,
level and hard surface and bal-
ance it with the adjustable
legs. Otherwise, the refriger-
ator may tip over and cause
injuries.
• The product shall be installed
in a dry and ventilated environ-
ment. Do not keep carpets,
rugs or similar covers under
the product. This may cause
risk of fire as a result of inad-
equate ventilation!
