background image

6

TRANSPORTATION INSTRUCTIONS

1.

The appliance should be transported only in a vertical upright position. The packing

 

as supplied must be intact during transportation.

2.

If transported horizontally, leave to stand upright for at least 

4

 hours before

 

switching

 

on, to allow compressor oil to settle.

3.

Failure to comply with the above instructions could result in damage occu

r

ring to

 

the

 

appliance. The manufacturer will not be held responsible if these instructions are

 

disregarded.

4.

The appliance must be protected against rain, moisture and other atmospheric

 

influences.

5.

When positioning your appliance take care not to damage your flooring, kitchen

 

furniture, related parts and doors, pipes, wall coverings etc. Do not move the

 

appliance by pulling by the door.

6.

Empty any water in the drain tray before moving. See section ‘

DEFROSTING

’ and

 

CLEANING AND CARE

’ for further information.

7.

Make sure that the defrost water pipe at the back of the product is fixed to the

 

plastic

 

evaporating pan on the top of the compressor, to avoid defrost water spillage

 

on the

 

floor. 

IMPORTANT:

 Care must be taken while cleaning / carrying the appliance to avoid 

touching the bottom of the condenser metal wires at the back of the appliance as you 

might injure your fingers and hands.

Do not attempt to sit or stand on top of your appliance as it is not designed for such 

use. You could injure yourself or damage the appliance.

"IMPORTANT:

 Make sure that mains cable is not caught under the appliance during 

and after carrying / moving the appliance, to avoid the mains cable becoming cut or 

damaged."

Do not allow children to play with the appliance or tamper with the controls. 

GRUNDIG

 declines to accept any liability should the instructions not be followed.

Summary of Contents for GKFED455

































Reviews: