10 / 20 EN
Refrigerator
/User Manual
Refrigerator
/User Manual
4
Preparation
4.1 Things to be done for
energy saving
A
Connecting the product to electric
energy saving systems is risky as it may
cause damage on the product.
•
Do not leave the doors of your cooler/
freezer open for a long time. When doors
are open,warm air enters the fridge/
freezer cabinets and the appliance
consumes more energy to cool down the
foodstuffs.
•
Do not put hot food or drinks in your
cooler/freezer.
•
Do not overload the cooler/freezer.
Cooling capacity will fall when the air
circulation inside is hindered.
•
Do not place the cooler/freezer in places
subject to direct sunlight. Install the
product at least 30 cm away from heat
sources such as hobs, ovens, heater cores
and stoves and at least 5 cm away from
electrical ovens.
•
Pay attention to store your food in cooler/
freezer in closed containers.
•
You can load maximum amount of
food to the freezer compartment of
the cooler/freezer by removing the
freezer compartment drawers. Declared
energy consumption value of the
cooler/freezer was determined with the
freezer compartment drawers and top
compartment flap removed and given wire
shelf is used at the bottom of the freezer
compartment for maximum amount of food
loaded. There is no risk in using a shelf or
drawer suitable for the shapes and sizes of
the foods to be frozen.
•
Thawing frozen food in fridge
compartment will both provide energy
saving and preserve the food quality.
•
Do not block the freezer fan grill by
placing foods in front.
•
Please use provided 2 pieces of cold
packs (PCM ) at recommended places
in the figure when storing foodstuffs in
freezer compartments.It also helps to
keep your foodstuffs colder for more time
when electricity is off or your appliance is
unplugged.Temperature rise time declared
with cold packs.
cold pack
foodstuffs
cold pack
foodstuffs
PCM
PCM
TOP SHELF
OF FREEZER
COMPARTMENT
