Refrigerator
/User Manual
19 / 20 EN
Refrigerator
/User Manual
Refrigerator
/User Manual
7
Troubleshooting
Please review this list before calling the service. It will save your time and money. This list
includes frequent complaints that are not arising from defective workmanship or material usage.
Some of the features described here may not exist in your product.
The cooler/freezer does not operate.
•
The plug is not inserted into the socket correctly. >>>
Insert the plug into the socket securely.
•
The fuse of the socket which your cooler/freezer is connected to or the main fuse have
blown out. >>>
Check the fuse.
Condensation on the side wall of the fridge compartment (MULTIZONE, COOL CONTROL and FLEXI ZONE).
•
Ambient is very cold. >>>
Do not install the cooler/freezer in places where the temperature falls below 10
°C.
•
Door has been opened frequently. >>>
Do not open and close the door of cooler/freezer frequently.
•
Ambient is very humid. >>>
Do not install your cooler/freezer into highly humid places.
•
Food containing liquid is stored in open containers. >>>
Store food with liquid content in closed
containers.
•
Door of the cooler/freezer is left ajar. >>>
Do not leave the doors of your cooler/freezer open for a long
time.
•
Thermostat is set to a very cold level. >>>
Set the thermostat to a suitable level.
Compressor is not running
•
Protective thermic of the compressor will blow out during sudden power failures or plug-out
plug-ins as the refrigerant pressure in the cooling system of the cooler/freezer has not been
balanced yet. The cooler/freezer will start running approximately after 6 minutes. Please
call the Authorised Service Agent if the cooler/freezer does not start at the end of this
period.
•
The fridge is in defrost cycle. >>>
This is normal for a full-automatically defrosting cooler/freezer.
Defrosting cycle occurs periodically.
•
The cooler/freezer is not plugged into the socket. >>>
Make sure that the plug is fit into the socket.
•
Temperature settings are not made correctly. >>>
Select the suitable temperature value.
•
There is a power outage. >>>
Cooler/freezer returns to normal operation when the power restores.
The operation noise increases when the cooler/freezer is running.
•
The operating performance of the cooler/freezer may change due to the changes in the
ambient temperature. It is normal and not a fault.