14
4. Preparation
4.1 Things to be done
for energy saving
A
Connecting the product
to electric energy saving
systems is risky as it may
cause damage on the
product.
•
Do not leave the doors of
your refrigerator open for a
long time.When doors are
open,warm air enters the
fridge/freezer cabinets and
the appliance consumes
more energy to cool down the
foodstuffs.
•
Do not put hot food or drinks in
your refrigerator.
•
Do not overload the refrigerator.
Cooling capacity will fall when
the air circulation inside is
hindered.
•
Do not place the refrigerator in
places subject to direct sunlight.
Install the product at least 30
cm away from heat sources
such as hobs, ovens, heater
cores and stoves and at least 5
cm away from electrical ovens.
•
Pay attention to store your
food in refrigerator in closed
containers.
•
You can load maximum
amount of food to the freezer
compartment of the refrigerator
by removing the freezer
compartment drawers. Declared
energy consumption value of
the refrigerator was determined
with the freezer compartment
drawers removed,except top
compartment flap and bottom
drawer and with maximum
amount of food loaded. There
is no risk in using a shelf or
drawer suitable for the shapes
and sizes of the foods to be
frozen.
•
Thawing frozen food in fridge
compartment will both provide
energy saving and preserve the
food quality.
C
The ambient temperature
of the room where you
install the refrigerator
should at least be
5°C. Operating your
refrigerator under colder
conditions than this is not
recommended.
C
Inside of your refrigerator
must be cleaned
thoroughly.
C
If two coolers are to be
installed side by side,
there should be at least
4 cm distance between
them.
Summary of Contents for GKN 16920 XP
Page 1: ...ENG DE www grundig com REFRIGERATOR USER INSTRUCTIONS GKN 16920 XP...
Page 2: ......
Page 52: ...25 Notes...
Page 53: ...26 Notes...
