16
C
Use the quick freeze
function when you want
to quickly freeze the
food placed in freezer
compartment. If you want
to freeze large amounts
of fresh food, activate this
function before putting
the food into the product.
C
If you do not cancel it,
Quick Freeze will cancel
itself automatically after 4
hours at the most or when
the fridge compartment
reaches to the required
temperature.
C
This function is not
recalled when power
restores after a power
failure.
13. Filter reset
The filter is reset when the quick
freeze button is pressed for 3
seconds. Filter reset icon goes off.
14. FN button
Using this key, you can switch
between the functions that you want
to select. Upon pressing this key,
the icon, whose function is required
to be activated or deactivated, and
this icon's indicator starts flashing.
The FN button gets deactivated if not
pressed for 20 seconds. You need
to press this button to change the
functions again.
15. Celsius indicator
It is a Celsius indicator. When the
Celsius indication is activated, the
temperature set values are shown in
Celsius and the relevant icon turns
on.
16. OK button
After navigating the functions
using the FN button, when the
function is cancelled via the OK
button, the relevant icon and
the indicator flashes. When the
function is activated, it remains on.
The indicator continues to flash in
order to show the icon it is on.
17. Temperature change cabin
icon
Indicates the cabin whose
temperature is to be changed. When
the temperature change cabin icon
starts flashing, it is understood that
the relevant cabin has been selected.
18. Temperature change cabin
icon
Indicates the cabin whose
temperature is to be changed. When
the temperature change cabin icon
starts flashing, it is understood that
the relevant cabin has been selected.
19. Set increasing button
Select the relevant cabin with
the select button; the cabin icon
representing the relevant cabin will
start to flash. If you press the set
increasing button during this process,
the set value gets increased. If you
keep pressing it in a loop, the set
value returns to the beginning.
20. Temperature change cabin
icon
Indicates the cabin whose
temperature is to be changed. When
the temperature change cabin icon
starts flashing, it is understood that
the relevant cabin has been selected.
21. Setting the Celsius and
Fahrenheit indicator
Hover over this key using the FN key
and select Fahrenheit and Celsius
