4
www.topvehicletech.com
FITTING GUIDE
4. Attach the additional wiring on the harness to the back of the stereo:
Pink
- Speed Pulse
5. When all the above wires (and any additional accessories) have been connected, finally make the power
connections between the stereo and the vehicles pre-existing connector.
3. Attach the antenna adapter to the vehicles pre-existing connection and the back of new stereo.
1. Take the steering wheel control interface and attach the 14-way steering wheel harness connector to
the relevant side.
STEREO INSTALLATION
2. Make a cut within the orange and purple loops on the back of the patch lead connector. Then proceed
to attach ‘
Key 1
’ to the light blue ‘SWC Remote’ wire on the stereo. When done, connect the 12-way
connector to the steering wheel control interface.
