31
ENGLISH
INSTALLATION
■
Please remember that the manufacturer
shall not be held liable if the information
given in the instruction manual is not
observed.
Points to be considered when re-
transporting your refrigerator
1. Your refrigerator must be emptied and
cleaned prior to any transportation.
2. Shelves, accessories, crisper and etc.
in your refrigerator must be fastened
securely by adhesive tape against any
jolt before repackaging.
3. Packaging must be tied with thick tapes
and strong ropes and the rules of
transportation printed on the package
must be followed.
Please remember…
■
Every recycled material is an
indispensable source for the nature and for
our national resources.
■
If you wish to contribute to recycling the
packaging materials, you can get further
information from the environmental bodies or
local authorities.
Before operating your
refrigerator
■
Before starting to use your refrigerator
check the following:
1. Is the interior of the refrigerator dry and
can the air circulate freely in the rear of
it?
2. Insert the 2 plastic wedges onto the rear
ventilation as illustrated in the following
figure. Plastic wedges will provide
the required distance between your
refrigerator and the wall in order to allow
the air circulation.
3. Clean the interior of the refrigerator as
recommended in the “Maintenance and
cleaning” section.
4. Plug the refrigerator into the wall outlet.
When the fridge door is open the fridge
compartment interior light will come on.
5. You will hear a noise as the compressor
starts up. The liquid and gases sealed
within the refrigeration system may also
give rise to noise, even if the compressor
is not running and this is quite normal.
6. Front edges of the refrigerator may
feel warm. This is normal. These areas
are designed to be warm to avoid
condensation.
Summary of Contents for GRND 5480
Page 1: ...BUZDOLABI GRND 5480...
Page 63: ...487589 0001 AF tr en de...
