16
c
a
a
b
1
2
3.7 Water connection
(This feature is optional)
Water system installation of the
refrigerator must be performed
by a competent person.
Depending on the model of the
refrigerator, you may not have to
connect to water main.First you
must connect the water hose to
the refrigerator.
Check that following parts have
been delivered together with the
product:
1. Union for connecting the
water hose to the rear of
the refrigerator
2. 3 pieces of pipe clips
(used to secure the water
hose)
3. 5-meter long water hose
(1/4 inch in diameter)
4. (4) Cold mains water
valve with mesh filter (tap
adapter)
5. (5) External water filter.
3.8 Connecting the water
hose to the refrigerator
1. Slip the union (b) onto the
water hose (a).
2. Push the water hose
downwards firmly to slip it
onto the water inlet valve
(c).
3. Tighten the union (c) by
hand to secure it onto the
water inlet valve.
C
Normally, you are not
required to tighten
the union with a tool.
However, you can use
a spanner or pliers
to tighten the union if
there is a leakage.
Summary of Contents for GSBS13310X
Page 1: ...ENG www grundig co uk USER INSTRUCTIONS GSBS13310X GSBS13320X...
Page 2: ......
Page 52: ...52 Notes...
Page 53: ...53 EN Notes...
