20
When the buttons are pressed
in the correct order, Key Lock
symbol will turn off, buzzer will
sound shortly and Filter Change
Warning indicator will turn on.
When the Filter Replacement
Warning button is pressed on,
filter usage times are started to
be calculated automatically.
C
If the filter usage time is
calculated automatically,
Filter Change Warning
indicator will illuminate
continuously in a few
seconds after the
product is plugged in.
C
Automatic filter usage
time calculation is not
enabled ex factory. It
must be enabled in
products equipped with
a filter.
C
If the same procedure
is repeated when
the automatic filter
usage time calculation
is enabled, then
the function will be
cancelled.
3.13 Before starting to use
the water/ice dispenser
(This feature is optional)
•
If the water pressure is below
1 bar then a separate pump
may need to be used.
•
Water system of the
refrigerator must be
connected to the cold water
line. It must not be connected
to hot water line.
•
No water may be obtained
in the initial start-up of
the refrigerator. Because
there is air in the system.
To discharge air from the
system, press dispenser latch
for 1-2 minutes until water
comes from the dispenser.
Water flow may be irregular
at the beginning. After the air
in the system is discharged,
water flow will return to
normal.
•
During initial use, you will
have to wait approximately
12 hours for the water to cool
down.
•
It will take around 1-2 days
for the system to produce the
full amount of ice.
•
Water pressure must be
between 1-8 bars for the
operation of ice/water
dispenser smoothly. For this,
check that 1 glass of water
(100 cc) can be filled in 10
seconds.
•
The first 10 glasses of water
should not be consumed.
Summary of Contents for GSBS13310X
Page 1: ...ENG www grundig co uk USER INSTRUCTIONS GSBS13310X GSBS13320X...
Page 2: ......
Page 52: ...52 Notes...
Page 53: ...53 EN Notes...
