36
5.7 Taking ice / water
(Optional)
To take water ( ) / ice cube (
) / fragmented ice ( ),
use the display to select the
respective option. Take water/
ice by pushing the trigger on the
water fountain forward. When
switching between ice cube (
) / fragmented ice ( ) options,
the previous ice type may be
discharged a few more times.
•
In case of power blackout
or temporary malfunction,
the ice may partly melt and
re-freeze. This will cause
the ice pieces to merge
with each other. In case of
extended power blackouts
or malfunction, the ice may
melt and leak out. If you
experience this problem,
remove the ice in the ice box
and clean the box.
A
WARNING:
The product’s
water system should be
connected to cold water line
only. Do not connect to hot
water line.
•
The product may not
discharge water during first
operation. This is caused by
the air in the system. The
air in the system must be
discharged. To do this, push
the water fountain trigger
for 1-2 minutes until the
fountain discharges water.
The initial water flow may be
irregular. The water will flow
normally once the air in the
system is discharged.
•
The water may be cloudy
during first use of the filter;
do not consume the first 10
glasses of water.
•
You must wait approximately
12 hours before taking ice
from the ice / water fountain
for the first time. The fountain
may not discharge ice if there
is insufficient ice in the ice
box.
•
The 30 pieces of ice cubes
(3-4 Litres) taken after first
operating should not be used.
Summary of Contents for GSBS16312B
Page 1: ...ENG www grundig co uk USER INSTRUCTIONS GSBS16312B...
Page 2: ......
Page 58: ...58 Notes...
Page 59: ...59 EN Notes...
