6 /35 EN
Refrigerator / User Guide
6
Safety
i
nstruct
i
ons
If you cannot prevent installation of
the product in the vicinity of a heat
source, you shall use a suitable
insulation plate and the minimum
distance to the heat source shall be
as specified below.
- At least 30 cm away from heat
sources such as stoves, heating units
and heaters, etc.,
- And at least 5 cm away from
electric ovens.
•
Your product has the protection
class of I. Plug the product in a
grounded socket that conforms
with the Voltage, Current and
Frequency values specified in
the type label. The socket outlet
shall be equipped with a fuse
with a rating of 10 A – 16 A.
Our company shall not be res-
ponsible for the damages that
shall be incurred as a result of
operating the product without
ensuring ground and electrical
connections made as per local
or national regulations.
•
The product's power cable must
be unplugged during installa-
tion. Otherwise, risk of electric
shock and injury may occur!
•
Do not plug the product to
loose, broken, dirty, greasy
sockets or sockets that has
come out their seats or sockets
with a risk of water contact.
•
Place the power cord and hoses
(if available) of the product so
that they shall not cause a risk
of tripping over.
•
Penetration of humidity to live
parts or to the power cord may
cause short circuit. Thus, do
not use the product in humid
environments or in areas
where water may splash (e.g.
garage, laundry room, etc.)
If the refrigerator is wet by
water, unplug it and contact an
authorized service.
•
Do not connect your refrigerator
to power saving devices. These
systems are harmful for the
product.
A
1.6
Operational safety
•
Do not use chemical solvents
on the product. These materials
contain an explosion risk.
•
In case of a failure of the
product, unplug it and do not
operate until it is repaired by
the authorized service. There is
a risk of electric shock!
•
Do not place a source of flame
(e.g. candles, cigarettes, etc.)
on the product or in the vicinity
of it.
