- 22 -
- 22 -
Setting the input channel “B”
• Use
to set the desired input channel.
• If necessary use the
▶
button to activate the menu “Fine
tuning” (“
0
” is displayed additionally).
• Use
for fine tuning.
—> Return to the main menu: Press the
◀
button.
• Press the
button.
—> The menu “Setting the hierarchical modulation ‘B‘ ” –
“
INPUT: Priority:
” is activated.
Setting the hierarchical modulation “B”
• By pressing
, set to “
high
“ or “
low
“
(not relevant in the case of standard modulation).
• Press the
button.
—> The menu “Setting the station filter ‘A’ ” –
e.g. “
Bx
1A TV + 01/18
” is activated.
Setting the station filter / channel strip “A”
– If no station is found the error message
“
FILTER: no
Service
” is displayed.
Check the configuration of the antenna system and head-
end as well as the previous settings of the cassette in ques-
tion.
Bx 1B
C40 (626.0)
INPUT:
OK
+
–
/
Bx 1A
C40 0
INPUT:
OK
-64 … +64
◀
▶
Bx 1B
C40 (626.0)
INPUT:
OK
+
–
/
Bx 1A
C40 0
INPUT:
OK
-64 … +64
◀
▶
Bx 1B
Priority:
INPUT:
high
Bx 1B
Priority:
INPUT:
high
