- 35 -
SMCIP 402 C/T
01/14
A
TV
*
+
ORF SPORT+
—> All stations from the channel strip will be read, and then displayed
with name and station type.
—> If no station is found, the following message will appear in the dis-
play: "
FILTER no Service
". In this case, check the configuration of
the antenna system, as well as the previously adjusted settings for
the device.
—> The display shows e.g.:
A TV
*
+ 01/14
ORF SPORT+
Meaning of the indicators in the example:
"
A
"
Tuner "
A
"
"
TV
"
TV channel type
"
+
"
The currently selected station is switched on.
"
01/14
"
The 1st of 14 stations is being displayed.
"
ORF SPORT+
" Station name
Further possible terms displayed:
"
RA
"
Radio channel type
For radio stations, the background of the screen of the
connected TV or test receiver is darkened.
"
–
"
The selected station is not included in the transport
stream.
"
*
"
The star means that the TV or radio station selected is
scrambled. To enable the station, the CA module and
the appropriate smart card of the station provider are
required.
"
X
"
The selected station will be descrambled.
—> If a service number (e.g. "
131
") appears instead of "
TV
" or "
RA
",
this indicates that an unnamed station or an undefined data stream
is being received.
• Use the
</>
buttons to call up the stations in sequential order, then use
+/–
to
activate (indicated by "
+
") or to deactivate them (indicated by "
–
").
—> If a station is scrambled (indication "
*
"), in this menu you select
whether it should be descrambled using an adequate CA module.
