- 7 -
SMCIP 402 C/T
RF output (SMCIP 402 T)
Frequency range: ............................................. 42.0 MHz … 868.0 MHz
Channels: ..........................................................C5 … C12, C21 … C69
Output level: ........................................................................... 102 dBμV
Output impedance: ......................................................................... 75
Ω
Connections
SAT inputs: ............................................................................. 4 F sockets
RF output: .............................................................................. 1 F socket
ASI input: .......................................................................... 1 BNC socket
ASI output: ......................................................................... 1 BNC socket
Micro USB socket: ...................................................... for software update
Common Interface: .......................1 (several channels can be descrambled)
Power Supply
Mains voltage: .................................................... 220–240V~, 50/60 Hz
2.4 d
esCriPtion
The transmodulator converts channels from up to 4 DVB-S/DVB-S2 transpond-
ers (four tuners)
dependent on the device version
into one
DVB-C or DVB-T
transponder.
Using an adequate CA module the scrambled signals contained in this mul-
tiplex (MUX) can be descrambled. The number of signals to be descrambled
depends on the CI module and the smart card.
b
loCk
diagr a m
Tuner "
A
"
SAT IN "
A
"
RF OUT
Tuner "
D
"
CA module
Tuner "
B
"
Tuner "
C
"
SAT IN "
B
"
SAT IN "
C
"
SAT IN "
D
"
MUX
Modulator
31 dB
Attenuator
ASI IN
ASI OUT
The 4 tuners receive their input signal from the outputs of a multiswitch.
In addition it is possible to add the signal from the ASI input instead of the
signal from Tuner D. The desired channels, which are selected via the sta-
tion filter, will be multiplexed, if needed descrambled and modulated to one
DVB-C/T transponder.
