26
6.12 Changing the programme
after it has started
After the machine starts, you can
change the selected programme
and dry your laundry in a different
programme.
1. If you want to select Extra Dry
programme instead of Iron Dry
programme, for instance, press
the Start / Pause button for 1
second to stop the programme.
2. Select Extra Dry programme
by turning the Programme
Selection knob.
3. Press the Start/Pause button to
start the programme.
Adding / removing laundry in Pause
mode
In order to add or take out laundry
after the drying programme has
started:
1. Press Start/Pause button to
switch the machine to Pause
mode. Drying process will stop.
2. While in Pause mode, open the
loading door, add or take out
laundry and close the loading
door.
3. Press the Start/Pause button to
start the programme.
C
Any laundry added after
the drying process has
started may cause the
clothes that are already
dried in the machine
intermingle with wet
clothes and the result will
be wet laundry after the
drying process is over.
C
You may repeat laundry
adding or removing
process as many times
as you desire during
drying. However, this
process will increase
the programme time
and energy consumption
since the drying process
will be interrupted
repeatedly. Therefore, it
is recommended to add
laundry before the drying
programme has started.
C
If you select a new
programme by turning
the Programme Selection
knob while your machine
is in Pause mode, then
the current programme
is aborted and new
programme information is
displayed.
CAUTION: Do not touch
the inner surface of the
drum when adding or
taking out laundry while
a programme is running.
Surfaces of the drum are
hot.
6.13 Cancelling the programme
If you want to stop drying and cancel
the programme for any reason after
the machine has started to run,
press and hold the
On/Off/Cancel
button for 3 seconds.
A
CAUTION: As the inside
of the machine will be
excessively hot when you
cancel the programme
while the machine is
running, activate the
ventilation programme to
cool it down.