6
2.1.1 Electrical safety
A
Electrical safety instructions should be followed while
electrical connection is made during the installation.
• Connect the dryer to a grounded outlet protected by a fuse at the
value specified on the type label. Have the grounding installation
performed by a qualified electrician. Our company shall not be
liable for any damages that will arise when the dryer is used
without grounding in accordance with the local regulations.
• The voltage and allowed fuse protection is stated on the type label
plate.
• The voltage specified on the type label must be equal to your mains
voltage.
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation, maintenance,
cleaning and repair works.
• Do not touch the plug with wet hands! Never unplug by pulling on
the cable, always pull out by grabbing the plug.
• Do not use extension cords, multi-plugs or adaptors to connect
the dryer to power supply in order to decrease the risk of fire and
electric shock.
• Power cable plug must be easily accessible after installation.
B
Damaged mains cable should be changed notifying the
Authorized Service.
B
If the dryer is faulty, it must not be operated unless it is
repaired by an authorized service agent! There is the risk of
electric shock!
Summary of Contents for GTN 38267 GCW
