49
DE
EN
2.1.1 Electrical safety
A
Electrical safety instructions should be followed while
electrical connection is made during the installation.
A
The appliance must not be supplied through an external
switching device, such as a timer,or connected to a circuit
that is regularly switched on and off by utility.
• Connect the dryer to a grounded outlet protected by a fuse
at the value specified on the type label. Have the grounding
installation performed by a qualified electrician. Our company
shall not be liable for any damages that will arise when the
dryer is used without grounding in accordance with the local
regulations.
• The voltage and allowed fuse protection is stated on the type
label plate.
• The voltage specified on the type label must be equal to your
mains voltage.
• Unplug the dryer when it is not in use.
• Unplug the dryer from the mains during installation,
maintenance, cleaning and repair works.
• Do not touch the plug with wet hands! Never unplug by pulling
on the cable, always pull out by grabbing the plug.
• Do not use extension cords, multi-plugs or adaptors to connect
the dryer to power supply in order to decrease the risk of fire
and electric shock.
• Power cable plug must be easily accessible after installation.
B
Damaged mains cable should be changed notifying the
Authorized Service.
B
If the dryer is faulty, it must not be operated unless it is
repaired by an authorized service agent! There is the risk
of electric shock!