70
Exit the menu by saving the settings
pressing Wrinkle Prevention button.
User may select the desired program
and operate the machine.
6.9 Warning symbols
C
Warning symbols may vary
depending on the model of
your machine.
Fibre filter cleaning
When the program is completed, the
warning symbol for filter cleaning
turns on.
C
Refer to “Troubleshooting”
section if filter cleaning
symbol constantly flashes.
Water tank
When the program is completed, the
warning symbol to empty the water
tank turns on.
If the water tank fills up while the
program continues, the warning
symbol starts flashing and the
machine goes into stand-by. In this
case, empty the water tank and start
the program by pressing the Start
/ Stand-by button. Warning symbol
turns off and program resumes.
Cleaning the filter drawer
Warning symbol flashes periodically
to remind that filter drawer must be
cleaned.
Loading cover is open
Following warnings are displayed
respectively if the loading cover of the
drying machine is open.
Door is open
Program Paused
Delay Setting
• You can delay the end time of the
program up to 24 hours with the
Delay Setting function.
• Open the loading door and place
the laundry.
• Select drying program, spin
cycle and if needed, additional
functions.
• Press the Delay Setting selection
button and set the delay time you
wish. Delay Setting symbol turns
on. (When the button is pressed
and hold pressed, Delay Setting
proceeds non-stop).
• Press the Start / Stand-by
button. Delay Setting countdown
starts and Delay Activated and
Program Started messages
are displayed on the screen.
“:” Separator in the middle of
displayed delay time flashes.
Program Started
End Time Enabled
