English
7
2. Device Connection
IP camera can be connected in two ways:
1. Connection to PC
Connect IP camera to PC via straight-through network cable, with power input connected to a DC
12V adaptor, and set the IP addresses of the PC and IP camera in one network segment. The IP
camera will communicate with PC within one minute after being powered on if the network
operates normally.
Figure 2.1 direct connection
2.
Connection to router/switch
This is more commonly used in connecting the IP camera to Internet, where the camera and PC
are connected to LAN ports of a router/switch, with gateway of the camera set to the IP address
of the router.
Figure 2.2 Connection with router/switch
Summary of Contents for GU-CI Series
Page 1: ...English 1 ...
Page 82: ......