background image

10

Switching the video recorder on and off 
(energy-saver mode)

1

Switch the video recorder on with the »

D

D

« button.

2

Switch the video recorder to standby with the »

88

« button.

– The video recorder is now in standby and the time is visible in the 

display.

3

Switch off by pressing the »

88

« button until the display goes out.

– The video recorder is now switched off, the power consumption falls below

2W. The green enregy-saver indicator illuminates.

Notes:

The video recorder cannot be switched off if recordings are programmed.
It is not allowed to switch the video recorder in the energy-saver mode if you
wish to watch a TV programme which is received via the aerial cable from the
video recorder on the TV set.

Inserting batteries into the remote control

1

Press the catch and remove the cover from the battery compartment.

2

Insert the batteries (Mignon type, e.g. UM-3 or AA, 2 x 1.5 V). Observe the
polarity marks on the bottom of the battery compartment.

Note:

If your recorder no longer responds correctly to the remote control commands,
the batteries may be exhausted. Exhausted batteries must be removed.
The manufacturer cannot be held responsible for damage resulting from 
battery leakage.

Environmental protection

The remote control batteries, even those containing no heavy metals, do not
belong in the household waste. Used batteries can be disposed of for recyc-
ling at most specialized dealers without paying a fee.

CONNECTING AND PREPARATION

_______________________________________

Summary of Contents for GV 29 VPS/5



































Reviews: