GV470S…
Allgemeiner T
eil / General
GRUNDIG
Servicetechnik
1 - 65
7. Special Functions
Operation with a GRUNDIG
Satellite Receiver
Operation
Switch on the TV set and the satellite receiver.
Reconnect the video recorder to the mains.
Recording satellite transmissions is described in the section
“Immediate Recording”.
Record programming for satellite transmissions is described
in the programming examples.
Preparation
Switch the TV set and the satellite receiver off.
Disconnect the video recorder from the mains.
Connecting
Connect the EURO-AV socket (to the recorder) of the satellite
receiver and the EURO-AV A2 socket of the video recorder
with a EURO-AV cable.
Connect the
`
VCR socket of the satellite receiver and the
}
socket of the video recorder with a commercially available
cinch cable.
Insert the aerial plug of the house aerial into the –
I I
– socket of
the video recorder.
Connect the
.
socket of the video recorder and the
socket
of the TV set with a commercially available aerial cable.
Connect the EURO-AV socket of the TV set and the EURO-AV
A1 socket of the video recorder with a EURO-AV cable.
If your satellite receiver is provided with a decoder socket,
you can connect to this socket an existing PAY-TV decoder.
EURO-AV
EURO-AV
DECODER A2
H
L
H
L
x
x
EURO-AV A1
L
R
AUDIO
L
R
OUT
EURO-AV
7. Special Functions
The Continuous Mode Function of the Recorder
Your recorder can:
Continuously record from different signal sources, for exam-
ple, from TV broadcasts or from units that are connected to a
corresponding socket.
Play back continuously.
Preparation for the continuous mode functions
For continuous recording, insert a cassette with sufficient
playing time.
For continuous playback, insert the cassette to be played.
Press the
J
button to start playback.
Press the
`
button when you have located the position
where playback should end.
Press the
Z
button, the numeric buttons
8 5 0 1
, and
then the
¶
OK
button.
You will see this in the display of the recorder: »
CONT
. «
Now you can select the different functions.
Continuous record mode function
Select the desired programme source:
Use the numeric buttons
1
…
0
to select a TV station
or
if the picture/sound source is connected to the EURO-AV A1
socket, press the
a
button until »
A I
« appears in the dis-
play of the recorder.
or
if the picture/sound source is connected to the VIDEO IN/CV
and L AUDIO IN R sockets, press the
a
button until »
C V
«
appears in the display of the recorder.
or
if the picture/sound source is connected to the S-VHS IN and
L AUDIO R sockets, press the
a
button until »
S I
«
appears in the display of the recorder.
Start the recording by pressing both of the
M
RECORD
;
buttons.
The recorder records all the way to the end of the tape and
then rewinds to the beginning of the tape where it begins
recording again.
Continuous playback mode function
Press the
J
button to activate this function.
The tape is rewound all the way to the beginning where it
starts playback.
The recorder plays back all the way to the position you
marked and then rewinds the tape back to the beginning and
starts the playback again.
Terminating the continuous mode functions
Press the
>
button on the recorder.
The Electronic Combination Lock
Your recorder is equipped with an electronic combination
lock.
This allows you to lock all functions of the recorder. Even a
cassette which is inserted after the lock has been activated
cannot be removed until you have unlocked the recorder.
You can lock and unlock your recorder quite simply with a
code number of one to four digits.
Write your personal code number in the boxes below.
Locking the recorder
Prepare to enter the code number by first pressing the
`
button and then the
D
button.
You will see this in the display of the recorder: »
K EY
«.
Enter a code number of one to four digits with the numbered
buttons
1
...
0
.
Store the code number in the memory with the the
¶
OK
but-
ton.
»
LOCKED
« and the clock time appear in the display of the
recorder.
The recorder is now locked.
If you forget or misplace your code number, your dealer will
be able to help you.
Unlocking the recorder
Press the
D
button, enter your personal code number with
the numeric buttons
1
...
0
, and then press the
¶
OK
but-
ton.
»
LOCKED
« disappears from the display of the recorder and
the clock time appears.
The recorder is now unlocked and you can select any desired
function.
If you insert a cassette now, it cannot be removed.
Your personal code number
