Recording – controlled from
external devices
If an external device with a timer is connected to the
recorder at the EURO-AV A1 or DECODER A 2
socket, this device can control recording on the
recorder
r
Preparation
Insert a cassette that has sufficient playing time and
is not erase protected.
r
Preparing the EURO-AV socket for the
external device
Press the
h
button followed by numbered button
2
.
– The » A1/A 2 Record Prepared « table appears.
Use the
F
or
E
buttons to switch on Record Pre-
pared.
Use the
D
button to select the » SAT source « line
and activate EURO-AV socket A1 or A 2 using the
F
or
E
buttons.
Store the setting with the
G
button.
– The recorder is in record prepared mode. The
timing of the recording will be controlled by the
external device.
Ń
!
If this function has been selected, TIMER recording
and operation with a decoder are not possible.
Ń
!
To terminate this function, repeat the setting proce-
dure from step
and switch the Record Prepared
(see step
) to “OFF”.
2
1
4
3
2
1
1
36
Continuous playback
r
Preparing continuous playback
Insert a recorded cassette.
Start playback with the
T
button.
At the point where the playback should stop, press
the
H
button.
One after another, press the
¢
CODE
button, numbe-
red buttons
8 5 0 1
and the
G
button.
– Display on the recorder: »
CONTINUOUS
«.
r
Starting continuous playback
Start the function using the
T
button.
– Display on the recorder: »
C-PLAY
«.
– The tape is rewound to the beginning, and play-
back begins here.
The tape runs up to the marked taped position.
Then the tape is rewound to the beginning and
playback begins again.
r
Terminating continuous playback
Press the
N
button.
1
1
4
3
2
1
Special Functions
GRUNDIG
TEXT-PROGRAMMING
Record-Prepared
OFF
SAT source
A1
< > :
ON/OFF
ʺ
: Select source
:
OK : Confirm
i : Return to Info menu
A1/A2 Record Prepared
Summary of Contents for GV 560 HiFi
Page 1: ...VIDEORECORDER GV 560 HiFi...
